Κάρτες Μνήμης, Περιφερειακά, Συνοδευτικά PC
Ugreen pocket enclosure for 2.5 '' SATA 3.0 6Gbps hard disk gray + cable USB – USB Type C 0.5m (CM300)
38.34€
Drive bay, 2.5 '' hard drive enclosure with SATA 3.0 Ugreen interface – gray (CM300)
The aluminum Ugreen CM300 pocket will allow you to quickly and easily convert your 2.5-inch hard drive to an external drive – ready to be connected via a USB Type C port. The housing supports fast data transfer up to 6Gbps and is compatible with macOS, Windows or Linux. . The ASM235CM intelligent chip guarantees maximum performance and energy saving.
Specification:
- Brand: Ugreen
- Model: CM300
- Port: USB Type C 3.2 Gen 2 (SuperSpeed USB 10 Gbps) (USB 3.1, USB 3.1 Gen 2) (female)
- Disk interface: SATA 3.0 / SATA 2.0 / SATA 1.0 (7 + 15 pins)
- Data transfer speed: up to 6Gbps
- Disk size: 2.5 '' HDD
- Disk thickness: up to 9.5 mm
- Maximum disk capacity: 6 TB
- The set includes: USB Type C – USB 3.0 cable, 50 cm long
- Dimensions: 133 x 82 x 15 mm
The most important advantages of the Ugreen CM300 hard drive bay:
- You will change your hard drive to an external USB drive. This is a great solution for storing your digital data
- You can quickly and easily transfer your data from a computer or console. Pocket supports data transfer speeds up to 6Gbps
- You don't need any tools to mount the drive in your pocket. Installation is extremely simple
Fast data transfer
The pocket will allow you to transmit data at speeds up to 6Gbps . Supports the UASP protocol which affects the speed of data transfer via the USB port.
Works with multiple devices
The built-in ASM235CM control controller allows you to connect the drive to many operating systems , including Windows 8, Windows 10, macOS or Linux. The drive will therefore work with devices such as laptops, PCs, TVs and video game consoles. Importantly, the chip has built-in protection against electrostatic discharge up to 4 kV.
Easy to install
The pocket has been designed so that the disk does not move inside and does not scratch. You also don't need any tools to mount the hard drive . Three steps are enough:
- Slide out the back of the housing.
- Insert the hard disk, then close the case.
- Connect the pocket to your laptop.
Reliability and safety
The housing is made of aluminum, so it is impact resistant . Thanks to intelligent energy management, it does not consume excessive amounts of electricity – it automatically goes into sleep mode after 3 minutes of inactivity. At the bottom, four silicone pads are attached to prevent slipping on the countertop. A USB Type C – USB Type A cable has been attached to the pocket, which simultaneously transmits data and supplies energy to the device.
